Back to list

FLIR FX App: Adjusting event notices

Motion sensitivity and Smart Zone alert settings will affect the number of event notices you receive. You can modify the sensitivity setting in the Automatic Recording Triggers menu or modify the Smart Zone alerts to adjust the number of event notices you receive. Smart Zone alerts allow you to select the areas where you would like to receive motion event notifications.

To adjust Automatic Recording Trigger sensitivity:

  1. Launch the FLIR FX app and access the camera Live View.

  2. Tap the Settings icon (gear icon) on smartphones, or tap Settings > Automatic Recordings on tablets.

  3. In the Automatic recording triggers window, tap the Audio icon (Active audio trigger), Motion Detection icon (Active motion trigger), Temperature icon (Active temperature trigger), or Humidity icon (Active humidity trigger) to enable or disable. Icons in an orange circle are enabled, and icons in a white circle are disabled. Use the sliders to adjust the sensitivity of each trigger.

    Automatic recording triggers menu

  4. Tap Save to save your settings.

To adjust Smart Zone alerts:

  1. Launch the FLIR FX app and access the camera Live View.

  2. Tap the Settings icon (gear icon) on smartphones, or tap Settings > Automatic Recordings on tablets.

  3. Tap the Motion Detection icon (motion detection icon) to enable motion detection.

  4. Use the sliders to adjust the sensitivity. The lower the sensitivity, the fewer notifications you will receive.

  5. Tap the Grid icon (grid icon) on the right.

    enable smart zone alerts

  6. Follow the prompts to configure the Smart Zone. The entire field of view is enabled by default. Selecting a smaller area for motion detection will decrease motion alert notifications.


Rate This Article
Was this article helpful?