Buy Online or Call 1-888-425-6739 | 8:30 AM - 10 PM EST | 7 Days a Week

LHA / LNK Series: Configuring display settings

Different monitors can support different image / video resolutions. If your image appears pixelated or cut off, you may need to modify your LHA / LNK Series DVR / NVR display resolution.

REMINDER: The maximum supported output resolutions for LHA / LNK Series are:

  • Up to 1080p resolution using a VGA Cable (not included)‎.
  • Up to 4K resolution using the included High Definition Multimedia Interface (HDMI) cable (4K monitor or TV required — 8/16-channel recorders only. 4-channel recorders support a maximum of 1080p output resolution)‎.

The following instructions require you to access your system using your DVR / NVR and a monitor.

To change display resolution:

  1. In the taskbar, click the Main Menu icon (home icon), and then click Settings > Display > Video Out.

  2. In the VGA/HDMI Resolution drop-down, select the resolution of your monitor or TV.

    Video Out Tab

    TIP: If the DVR / NVR display is cropped,‎ check the Support Overscan checkbox to optimize your display. This is usually seen in older Cathode Ray Tube (CRT)‎ monitors.

  3. Click Save to save the settings.

  4. Click OK.

If you are experiencing difficulties with your display, you may want to restore default settings.