Back to list

W281AA - How to activate or deactivate camera siren

Your smart device is equipped with a siren. You can activate the siren manually or automatically when motion is detected.


Manual

Here's how to manually activate or deactivate camera siren.

Step 1. Launch the Lorex App app, then tap Device Thumbnail to open Live View.

Tap Device Thumbnail

Step 2. Tap camera siren button to manually activate the camera siren.

Tap siren button

Step 3. When propmpted, tap OK to turn it ON.

Tap OK

NOTE: The siren will blow off for 10 seconds.

Siren is ON

Step 4. Tap the siren for the second time to turn it OFF.

Motion

Here's how to link camera siren with motion detection.

Step 1. Launch the Lorex App app, then tap Device Settings.

Tap Device Settings

Step 2. Tap Detection Settings.

 Tap Detection Settings

Step 3. Toggle Motion Detection button to ON.

Toggle Motion Detection to ON

Step 4. Tap Smart Detection.

Tap Smart Detection

Step 5. Toggle Outdoor Mode button to ON if you want to link camera siren to Vehicle Detection.

Toggle Outdoor Mode to ON

Step 6. Toggle Person Detection button to ON to activate camera siren when person is detected.

Toggle Person Detection to ON

Step 7. Toggle Vehicle Detection button to ON to activate camera siren when vehicle is detected.

Toggle Vehicle Detection to ON

Step 8. Go back to Detection Settings, then toggle Siren Activation to ON to link camera siren to motion detection.

Toggle Siren Activation to ON


Rate This Article
Was this article helpful?