W452AS Series - 2K Wired Floodlight: Using Smart Security Lighting
The following article provides instructions for using the Smart Security Lighting™ deterrence feature on your 2K Wired Floodlight camera (W452AS Series) using the Lorex App.
- Set the Smart Security Lighting™ Settings
- Set the Smart Security Lighting™ Modes
- Disable Smart Security Lighting™
Certain Lorex Wi-Fi cameras have a built-in, colorful Smart Security Lighting™. This smart lighting feature can be set to different lighting modes or paired with smart motion detection settings for deterrence.
Smart Security Lighting™ is compatible with certain Lorex Wi-Fi cameras. For a complete list of compatible cameras, navigate to your camera at lorex.com/compatibility.
Set the Smart Security Lighting™ Settings (Lorex App)
Set Smart Security Lighting™ settings for when smart detection events occur (active deterrence).
Pre-requisite: Download the Lorex App and connect your smart phone. Refer to the Quick Start Guide for full instructions.
-
Launch the Lorex App.
-
Tap
icon above the channel thumbnail on the Devices screen.
-
Tap on Motion Detection Settings.
-
Swipe to the bottom and tap on Light Settings.
- Tap on Smart Lighting Settings.
- Tap to enable the smart detection feature, and configure the following:
-
Light Color: Tap to open the color wheel, then swipe through to set a custom color. Tap Save.
-
Light Mode: Select Solid for a solid light or Flashing for a flashing light. Tap Save.
-
Color Light Brightness: Adjust the Smart Security Lighting™ brightness level, with 1 being the lowest and 5 being the highest.
-
Light Schedules: Tap on a weekday to adjust Smart Security Lighting™ time schedule preferences. Set the start time and end time, then select other weekdays to repeat the schedule. Tap Save.
- Tap Save to apply all changes.
Set the Smart Security Lighting™ Modes (Lorex App)
-
Launch the Lorex App.
-
Tap
icon above the channel thumbnail on the Devices screen.
-
Tap on Motion Detection Settings.
- Swipe to the bottom and tap on Light Settings.
- Tap on Smart lighting Modes.
- Select a smart lighting mode and then tap Set.
- (Optional) Select Custom Mode, and then tap again to customize it:
-
Sun - Sat: Select a weekday for the schedule.
-
AM - PM: Set the schedule start time and end time.
-
Light Color: Tap to open the color wheel, then swipe through to set a custom color. Tap Save.
-
Light Mode: Select Solid for a solid light or Flashing for a flashing light. Tap Save.
-
Light Brightness: Adjust the Smart Security Lighting™ brightness level, with 1 being the lowest and 5 being the highest.
-
+Add New Schedule: Create another schedule.
- Tap Save.
- Tap Set to apply the Custom Mode for Smart Security Lighting™.
Disable Smart Security Lighting™ (Lorex App)
-
Launch the Lorex App.
-
Tap
icon above the channel thumbnail on the Devices screen.
-
Tap on Motion Detection Settings.
- Swipe to the bottom and tap on Light Settings.
- Tap on Smart Lighting Settings.
- Tap on the
icon to disable the smart detection feature. Make sure all the features are disabled
.
- Tap Save.
- Tap
to go back, and then tap on Smart lighting modes.
- Tap
to deselect any enabled modes.
- Tap
to go back and save your deselections.