< Back to list

AP5V2000W-U Power Adapter: Installation Guide

This article gives installation instructions for your AP5V2000W-U power adapter.

What is included:

  • Plugs Type: A/C/G/I
  • USB Power Adapter
  • USB Cable
  • Cable Guide
  • Cable Converter

Safety Guidelines:

Warning: Using a damaged cable or adapter can cause fire, electric shock, injury, or damage to the camera or other property.

  • Avoid pulling on the cable. Always grip the power adapter firmly when unplugging from a power outlet and when disconnecting the cable.
  • Connect the power adapter only to a weatherproof power outlet.


The outdoor power adapter operates in temperatures between 14° to 113°F (-10° to +45°C). Lorex's rechargeable camera battery pack will not charge when the temperature drops below 32°F (0°C). The battery pack resumes charging when the temperature is between 32° to 113°F (0° to 45°C).


  1. Attach the applicable plug, power adapter, and cable.

Attaching a plug

  1. Choose a power outlet close to where the camera will be installed.
  2. Make a path for the 14.7 ft/4.5 m cable running from the outlet to the camera.
  3. Secure the cable to the wall using the included cable guides.

Installing cable guides

  1. For U855 & U424 Cameras: Open the Camera's charging port cover. Plug the power adapter into the chosen outlet and connect directly to the camera's charging port.
  2. For U471 & F861 Cameras, follow steps 6-8: Connect the end of the cable to the female end of the cable converter.

Installing charging port cover

  1. Close the weatherproof cable covers so that the connected cables are protected.

Installing charging port cover

  1. Open the camera's charging port cover and connect the end of the cable converter to the camera.

Plugging in the power adapter

Recommended: Plug the power adapter to a weatherproof electrical outlet box (not included).

Rate This Article
Was this article helpful?