The following Lorex mobile apps have been tested as compatible with iOS 11. For unsupported apps, the replacement third-party apps can be downloaded from the App Store (where specified). Compatible with iOS 11: Digi Summit Lorex NetHD St...
Your FLIR Client 12 software system information screen displays useful system information such as the IP address , MAC address , device ID , Device model, and firmware version for your DVR / NVR system. Prerequisites: Ensure that you...
The On-Screen Display (OSD) shows the channel name with the date and time stamp on the top-right corner of the live feed or video playback. You can change the settings and the position of the OSD using the FLIR Client 12 software for PC / Mac....
The LHA / LNK Series DVR / NVR requires an IP address to communicate with the router . The IP address can be automatically assigned by the router using Dynamic Host Configuration Protocol (DHCP) , or can be manually assigned a static IP addre...
Your DVR / NVR system uses two different recording streams: Mainstream: a high-quality stream used for live viewing and recording. Substream: a lower quality stream used for remote viewing and playback. You can use these recording st...
You can configure your DVR / NVR system to record motion detection events using the FLIR Client 12 software for PC / Mac. Prerequisites: Ensure that you have downloaded and installed the FLIR Client 12 software on your PC / Mac En...
Your DVR / NVR system has recording settings that can be configured using the FLIR Client 12 software for PC / Mac . Basic configuration options include recording for specific channels, selecting a stream mode, and enabling pre-recording. Prer...
Your DVR / NVR system uses two different recording streams: Mainstream: a high-quality stream used for live viewing and recording. Substream: a lower quality stream used for remote viewing and playback. You can use these recording st...
If you would like to correct or adjust your DVR / NVR system time, you can configure time settings by enabling / disabling the Network Time Protocol (NTP) , adjust Daylight Savings Time (DST), or manually enter the time using the FLIR Client 12 so...
You can set the your DVR / NVR system to record snapshots using the Auto Capture feature on your FLIR Client 12 software . Auto Capture automatically saves snapshots of a camera image at time intervals, and help to conserve hard disk drive (HDD...