LHV / LNR Series: Pairing your remote control

Some DVR / NVR systems include a remote control. If you have more than one DVR / NVR system in the same location, you can set up your remote control to pair with a specific system. The remote control address can also be reset if it is not working as expected.

Prerequisite:

• The following instructions are for the NR900 series NVRs. For product specific instructions please refer to your user manual. Product downloads and documentation

To set or reset the remote control address:

1. Right-click on the Live View to access the Quick Menu.
2. Click Main Menu and then click the Setting icon ().
3. Click Setting > General.
4. Click the General tab.
5. For Device No., enter an address number (1-9) for the remote control and click OK.

4. Using the remote control, press Add, enter the same address number, and press Enter.

   IMPORTANT: When entering the address number using the remote, make sure that you press three digits. For a single-digit number two zeros should be before the number (e.g., if 8 is the Device No., press Add and enter 008 on the remote).