N Series NVRs: Changing the recorder’s output resolution

To ensure the best possible picture quality, set the recorder’s output resolution to match the highest resolution supported by your monitor.

!!! IMPORTANT: If you need to switch the monitor, make sure you set the recorder to an output resolution supported by the new monitor before switching.

To change the recorder's output resolution:
  1. From live view, right-click and then click Main Menu. If prompted, log in using the system user name (default: admin) and your new, secure password.
  2. Click Display, then configure the following:

Resolution Settings

A Set Resolution to match the highest resolution supported by your monitor. For example, select 3840×2160 for 4K monitors, or 1920×1080 for 1080p.

B Click OK. The recorder will restart before changes take effect.

Was This Content Helpful?