Your FLIR Client 12 software system information screen displays useful system information such as the IP address , MAC address , device ID , Device model, and firmware version for your DVR / NVR system. Prerequisites: Ensure that you...
The On-Screen Display (OSD) shows the channel name with the date and time stamp on the top-right corner of the live feed or video playback. You can change the settings and the position of the OSD using the FLIR Client 12 software for PC / Mac....
The LHA / LNK Series DVR / NVR requires an IP address to communicate with the router . The IP address can be automatically assigned by the router using Dynamic Host Configuration Protocol (DHCP) , or can be manually assigned a static IP addre...
Your DVR / NVR system uses two different recording streams: Mainstream: a high-quality stream used for live viewing and recording. Substream: a lower quality stream used for remote viewing and playback. You can use these recording st...
You can configure your DVR / NVR system to record motion detection events using the FLIR Client 12 software for PC / Mac. Prerequisites: Ensure that you have downloaded and installed the FLIR Client 12 software on your PC / Mac En...
Your DVR / NVR system has recording settings that can be configured using the FLIR Client 12 software for PC / Mac . Basic configuration options include recording for specific channels, selecting a stream mode, and enabling pre-recording. Prer...
Your DVR / NVR system uses two different recording streams: Mainstream: a high-quality stream used for live viewing and recording. Substream: a lower quality stream used for remote viewing and playback. You can use these recording st...
If you would like to correct or adjust your DVR / NVR system time, you can configure time settings by enabling / disabling the Network Time Protocol (NTP) , adjust Daylight Savings Time (DST), or manually enter the time using the FLIR Client 12 so...
You can set the your DVR / NVR system to record snapshots using the Auto Capture feature on your FLIR Client 12 software . Auto Capture automatically saves snapshots of a camera image at time intervals, and help to conserve hard disk drive (HDD...
You can quickly take snapshots from enabled channels using the Manual Capture feature using the FLIR Client 12 software for PC / Mac . Capture by default, is disabled. Prerequisites: Ensure that you have downloaded and installed the FL...