Back to list

ECO Series: Connecting a monitor to your DVR / NVR system

Depending on the type of monitor / TV screen being used, you can connect to your DVR / NVR system using an HDMI, VGA, DVI, or RCA cable. We recommend using an HDMI cable when possible, however, check which cable your monitor / TV screen is compatible with.

TIP: If using a DVI connection, a DVI to HDMI / VGA adapter can be used.

If the monitor / TV being used only has RCA inputs, it can be connected to the video output port of the DVR / NVR through the use of a BNC or RCA cable and an adapter.

  • For BNC cables use the Lorex model BNCB to connect to an RCA input on your monitor / TV.
  • For RCA cables use the Lorex model BNCA to connect to the DVR / NVR video output port.

On ECO series DVRs, press 000 on the remote control to switch the mouse and system menus between BNC and VGA / HDMI monitors.

Rate This Article
Was this article helpful?