AWDGL-1 - No-drill Mount Kit for Video Doorbell B463AJD Series: Installation

This article gives instructions on how to install your AWDGL - No-drill Mount Kit for Video Doorbell B463AJD Series.

Installing the No-Drill Mount Kit:

1. Ensure the surface is smooth, clean, and dry.
2. Peel off the protective film without touching the adhesive.

3. Carefully attach the bracket to the surface.

4. Mount the Video Doorbell on the bracket.

Removing the No-Drill Mount Kit:

1. Insert the Release Pin into the top hole of the bracket. Gently push until the Video Doorbell is released.

2. Gently wiggle the bracket side to side to avoid damage to the wall. Then clean the wall to remove any leftover adhesive residue.

For information on reinstalling your No-Drill Mount Kit, or for other questions, please visit the No-Drill Mount Kit FAQ page.