Back to list

Setup: Remote control not detected by the system

Your Lorex by FLIR DVR / NVR system may include a remote control. If your remote control is not being detected by your DVR / NVR, try the following troubleshooting steps.

Prerequisites:

​To troubleshoot your remote control not being detected by the system:

  • Check the remote control batteries. If they are drained, replace them with new batteries.

  • Ensure that the line of sight between your DVR / NVR system and the remote control is not blocked. Make sure there are no objects blocking the path between the IR receiver on the front panel and the remote control.


Rate This Article
Was this article helpful?