< Back to list

2K Wire-Free System Setup - How to add a camera

The following section describes how to add a 2K Smart Deterrence camera to the Home Hub after the initial setup of the Lorex Home Hub.

To add a camera:

  1. Launch the Lorex App.
  2. Tap the + icon beside the Home Hub. Make sure you only pair one camera at a time.

Devices screen 3. Follow the in-app instructions to complete the setup. 4. After completing the setup for one camera you have the option to add another. Tap Set up another camera, then follow the in-app instructions.

Camera setup option

If you are still experiencing issues, see the article 2K Wire-Free Camera - Camera connection timing out during setup.


Rate This Article
Was this article helpful?