LHB Series: Setting up your DVR
Once you have set up your Wire-Free cameras, you must set up your LHB Series DVR using a mouse (included) and monitor (not included).
Prerequisites:
To set up your LHB800 DVR:
-
Connect the DVR to your router using the included Ethernet cable.
-
Connect the included power adapter to the DVR. Wait a few minutes for the system to start up.
REMINDER: This guide describes basic setup of the DVR only. This installation is intended for users who wish to monitor their system using the free Lorex Secure / FLIR Secure app on their smartphone or tablet. You may choose to use the DVR interface to control your wire-free security system. Connect the included USB mouse to one of the USB ports labelled Mouse / Backup, and connect a monitor using the included HDMI cable.
To set up your LHB900 DVR:
-
Connect the wireless receiver to the USB port on the back panel of the DVR.
REMINDER: The receiver includes double-sided tape and mounting screws for optional wall mounting for improved line-of-sight with cameras.
-
Connect the DVR to your router using the included Ethernet cable.
-
Connect the included power adapter to the DVR. Wait a few minutes for the system to start up.
REMINDER: This guide describes basic setup of the DVR only. This installation is intended for users who wish to monitor their system using the free Lorex Secure / FLIR Secure app on their smartphone or tablet. You may choose to use the DVR interface to control your wire-free security system. Connect the included USB mouse to one of the USB ports labelled Mouse / Backup, and connect a monitor using the included HDMI cable.
Once you have set up your LHB Series DVR, you must use the DVR Setup Wizard to complete your DVR configuration. Click here for information on how to complete the DVR Setup Wizard.
You can also connect to your and view your cameras using the Lorex Secure / FLIR Secure app. Click here for information on how to connect to your DVR using the Lorex Secure / FLIR Secure app.