Back to list

E893DD, E893AB, Halo Series, H13 - 4K IP Wired Bullet & Dome Security Cameras with Smart Deterrence: Live View Settings

This article provides an overview of the live viewing feature of 4K Smart Deterrence IP Camera (E893DD Series, E893AB Series) with the help of Lorex App.


Live Viewing lets you see the camera recording in real time. This camera features a pan-tilt feature that allows you to remotely adjust it's a field of view up and down or left and right straight from your phone.

To access the live viewing screen:

From the Devices screen, tap a device thumbnail to start live view for a single camera. There are two modes for live viewing controls:

  • Portrait Mode
  • Landscape Mode

Configuring Live View

Live View

  1. Return to Main Menu

  2. Settings: Configure settings for the selected device.

  3. Live Video:

  • Tap any channel to select and use controls while in multichannel view.
  • Double-tap any channel to view in single-channel mode.
  1. Timeline: Tap to search for and play back recorded videos. For more instructions, see Portrait Timeline.

  2. Snapshot: Tap to save a still image of the current live view.

  3. Talk: Tap to speak through your camera from your mobile device. Tap again to listen in.
    Note: If you are using the camera on NVR, make sure the audio is enabled on your recorder’s sub-stream before using two-way audio. See the instruction manual for your recorder for full instructions.

  4. Record Video: Tap to begin manual recording of the current live view. Tap again to stop recording and save the video clip to your Lorex App.

  5. Siren: (Deterrance cameras only) Tap to enable the camera's siren.

  6. Light: (Deterrance cameras only) Tap to enable the warning light.

  7. Response: Tap to select a prerecorded response. For full instructions on setting a custom quick response, see Setting Custom Quick Response.

  8. Pan-Tilt Zoom Control (PTZ): Tap to adjust the field of view up and down or left and right.

PTZ Control

1. **Pan-Tilt Zoom Control:** Tap or tap-and-drag on the PTZ control bar to adjust the field of view in the current video.

2. **Close:** Tap to return to the main live viewing screen.

Note: This feature is supported on PTZ cameras only.

  1. Pause/Restart Video
  2. Viewing Mode: Switch between single and multichannel views.
  3. Video Quality: Tap to switch between SD/HD. Tap to switch to SD to optimize streaming.
    Note: HD resolution will be limited to the maximum screen resolution of your mobile device. This will not impact the recording resolution of the recorder.
  4. Audio: Tap to mute / unmute.
  5. Full screen: Tap to view in landscape mode.


Rate This Article
Was this article helpful?