Cameras and Image Quality
Search Articles in this category
IR Cameras: Halo effect in night vision mode
A halo effect is caused when infrared (IR) light from the camera's night vision LEDs are reflected back into the lens. If you have pointed your camera through a glass window,...
Learn More >IR Cameras: Increasing night vision capabilities
Infrared (IR) blasters and flood lights can be used to increase night vision capabilities. IR blasters and flood lights are supported and sold on the Lorex website. They are secondary...
Learn More >IR Cameras: No color in night vision mode
In low-light conditions most infrared (IR) security cameras will automatically shift to black and white IR / night vision recording. Black and white IR images ensure the maximum level of detail...
Learn More >IR Cameras: Video displaying in black and white
Infrared (IR) cameras have a sensor that measures the ambient light. This determines when to switch the camera between color recording and IR / night vision recording. If there is not...
Learn More >MPX PTZ Cameras: Image not displaying
The Megapixel over Coax (MPX) Pan-Tilt-Zoom (PTZ) camera makes it possible to view large areas with a single camera connected to a DVR. Click here for assistance with setup...
Learn More >MPX PTZ Cameras: Installation and setup on LHV / LNR
A Megapixel over Coax (MPX) Pan-Tilt-Zoom (PTZ) camera makes it possible to view large areas with a single camera connected to a DVR. PTZ cameras are able to rotate along...
Learn More >PTZ Cameras: Motion detection alerts triggered by PTZ controls / presets
Depending on your system, you can use your DVR / NVR menu to set your Pan-Tilt-Zoom (PTZ) Cameras to move in a specific pattern. This is called setting up a tour...
Learn More >PTZ Cameras: Video feed not displaying
If the video feed of a channel using a Pan-Tilt-Zoom (PTZ) camera is not visible, there may be an issue with the camera or its connection. Ensure that the Ethernet...
Learn More >Security Cameras: Continuously restarting
If your camera is continuously restarting, there may be an issue with the power outlet, power adapter, or cables. To resolve the restarting issue: If your camera uses a power adapter,...
Learn More >Security Cameras: Multiple feeds not displaying
When using multiple analog cameras simultaneously, camera feeds not displaying indicates that some cameras may not be receiving the required amount of power. To ensure that the camera is receiving sufficient...
Learn More >11 - 20 of 30