Configuration and Setup
Search Articles in this category
LHV / LNR Series: Configuring a snapshot schedule
The first step to setting up snapshots is to enable them in your LHV / LNR Series DVR / NVR menu. By default, your LHV / LNR system may have...
Learn More >LHV / LNR Series: Configuring display settings
Different monitors can support different image / video resolutions. If your image appears pixelated or cut off, you may need to modify your LHV / LNR Series DVR / NVR display resolution....
Learn More >LHV / LNR Series: Configuring recording settings
The LHV / LNR Series DVR / NVR systems have many different recording settings that can be configured. These include compression settings, resolution settings, frames per second (FPS) settings, as well...
Learn More >LHV / LNR Series: Connecting a monitor to your DVR / NVR system
Depending on the type of monitor / TV screen being used, you can connect to your DVR / NVR system using an HDMI, VGA, DVI, or RCA cable....
Learn More >LHV / LNR Series: DVR / NVR keeps beeping
Depending on your model, your LHV / LNR Series DVR / NVR system is set by default to beep when there are specific errors or events. These include motion alerts, hard...
Learn More >LHV / LNR Series: Enabling and configuring snapshots
Your LHV / LNR Series DVR / NVR system can be set to record snapshot images. Snapshots are still image files saved to your DVR / NVR Hard Disk Drive (HDD)....
Learn More >LHV / LNR Series: Enabling email notifications using the Lorex email server
On an LHV / LNR Series DVR / NVR, the Lorex email server can be used to send and receive alerts such as motion detection or other events. To send out motion...
Learn More >LHV / LNR Series: Enabling motion detection
You can configure your LHV / LNR Series DVR / NVR system to record motion detection events. To enable motion detection: Right-click on the Live View to access the...
Learn More >LHV / LNR Series: Enabling snapshots during Motion Detection Alerts
The first step to setting up snapshots is to enable them in your LHV / LNR Series DVR / NVR menu. Click here for more information on enabling snapshots. Snapshots can...
Learn More >LHV / LNR Series: Incorrect time or time changing automatically on the recorder
The time on your DVR / NVR can be configured manually, or automatically by enabling Network Time Protocol (NTP). If the recorder is showing the incorrect time, or the time is...
Learn More >91 - 100 of 210