Configuration and Setup
Search Articles in this category
LHB Series: Setting an email schedule
Your LHB Series DVR email settings can be configured so that email notifications are only sent at certain times / days. You can set separate schedules for motion events and system warnings...
Learn More >LHB Series: Setting up email notifications using the Lorex server
You can use the free Lorex email server (recommended) to send and receive notifications on the LHB Series DVR. You can configure your email notifications to receive emails for events like motion...
Learn More >LHB Series: Setting up email notifications using your own server information
On an LHB Series DVR, you can use your own server information to set up email notifications to send and receive motion detection events or system warnings. It is recommended to use...
Learn More >LHB Series: Setting up your DVR
Once you have set up your Wire-Free cameras, you must set up your LHB Series DVR using a mouse (included) and monitor (not included). Prerequisites: Ensure that you have...
Learn More >LHB Series: Setting up your Wire-Free camera and receiver
When initially setting up your LHB Series DVR, you will need to prepare the included power packs, Wire-Free cameras, and wireless receiver. REMINDER: Power packs come fully charged with no need...
Learn More >LHV / LNR / MPX Series: Setting the time on DVR / NVR
When setting up your LHV / LNR / MPX Series DVR / NVR system for the first time, it is highly recommended that the system date and time be set accurately. This...
Learn More >LHV / LNR Series: Accessing system information
The Info window for your DVR / NVR system displays useful system information such as the IP address, MAC address, device ID, device model, and firmware version. You can...
Learn More >LHV / LNR Series: Assigning names to channels
Custom names can be assigned to a channel (e.g., hallway, front door, camera1) for ease of identification. To assign names to channel connected to an LHV / LNR Series cameras: ...
Learn More >LHV / LNR Series: Changing the IP address of the NVR / DVR
When your LHV / LNR Series DVR / NVR system connects to your router it requires an IP address to communicate with. This IP address can either be automatically assigned...
Learn More >LHV / LNR Series: Configuring a snapshot schedule
The first step to setting up snapshots is to enable them in your LHV / LNR Series DVR / NVR menu. By default, your LHV / LNR system may have...
Learn More >81 - 90 of 210