Configuration and Setup
Search Articles in this category
LHA / LNK Series: Setting up email notifications using your own server information
On an LHA / LNK Series DVR / NVR, you can use your own server information to set up email notifications to send and receive motion detection events or system warnings. It...
Learn More >LHA / LNK Series: Using Picture Search to locate and back up snapshots
You can use Picture Search to view a list of snapshots taken with Auto Capture or Manual Capture and back up snapshots to a USB flash drive (not included). Prerequisites: ...
Learn More >LHB Series: Accessing system information
The LHB Series DVR system information displays useful system information such as the IP address, MAC address, device ID, device model, and firmware version. The following instructions require...
Learn More >LHB Series: Adding a new user
Your LHB Series DVR supports two account types: ADMIN / System Administrator The system administrator has full control of the system, and can change both administrator and user passwords, and enable...
Learn More >LHB Series: Changing a camera's On-Screen Display (OSD)
The On-Screen Display (OSD) shows the channel name with the date and time stamp on the top-right corner of the live feed or video playback. You can change the settings and the...
Learn More >LHB Series: Changing video output settings
Your LHB Series DVR is capable of either NTSC or PAL video outputs. The video output for your system is determined intelligently based on the region you set during the setup wizard....
Learn More >LHB Series: Checking your camera firmware
To troubleshoot certain issues, technical support may ask you for the firmware version of your LHB Series Wire-Free cameras. The following instructions require you to access your system using your DVR...
Learn More >LHB Series: Completing the setup wizard
Once you have completed setting up your LHB Series DVR and have connected it to a monitor, you must use the DVR Setup Wizard to configure required settings. Prerequisites: Complete...
Learn More >LHB Series: Configuring basic network settings
The LHB Series DVR requires an IP address to communicate with the router. The IP address can be automatically assigned by the router using Dynamic Host Configuration Protocol (DHCP),...
Learn More >LHB Series: Configuring Daylight Savings Time (DST) on your DVR
You can customize settings for Daylight Savings Time (DST) based on your region or preference. The following instructions require you to access your system using your DVR and a monitor. ...
Learn More >61 - 70 of 210