Configuration and Setup
Search Articles in this category
LHA / LNK Series: Configuring basic network settings
The LHA / LNK Series DVR / NVR requires an IP address to communicate with the router. The IP address can be automatically assigned by the router using Dynamic...
Learn More >LHA / LNK Series: Configuring display settings
Different monitors can support different image / video resolutions. If your image appears pixelated or cut off, you may need to modify your LHA / LNK Series DVR / NVR display resolution....
Learn More >LHA / LNK Series: Configuring mainstream recording settings
The LHA / LNK Series DVR / NVR system uses two different recording streams: Mainstream: a high-quality stream used for live viewing and recording. Substream: a lower quality stream used for...
Learn More >LHA / LNK Series: Configuring motion detection settings
You can configure your LHV / LNR Series DVR / NVR system to record motion detection events. The following instructions require you to access your system using your DVR / NVR...
Learn More >LHA / LNK Series: Configuring recording settings
The LHA / LNK Series DVR / NVR systems have many different recording settings that can be configured. Basic configuration options include recording for specific channels, selecting a stream mode, and enabling...
Learn More >LHA / LNK Series: Configuring substream recording settings
Your LHA / LNK Series DVR / NVR system uses two different recording streams: Mainstream: a high-quality stream used for live viewing and recording. Substream: a lower quality stream used for...
Learn More >LHA / LNK Series: Connecting a monitor to the DVR / NVR
Depending on the type of monitor / TV screen being used, you can connect to your DVR / NVR system using an HDMI or VGA cable. We recommend using an...
Learn More >LHA / LNK Series: Date and time on the DVR / NVR
If your LHA / LNK Series DVR / NVR is showing the incorrect time, adjust your time configuration settings by enabling the Network Time Protocol (NTP) or the Daylight Savings Time...
Learn More >LHA / LNK Series: DVR / NVR keeps beeping
Depending on the model, the LHA / LNK Series DVR / NVR may be set by default to alert you when there are specific errors or events. To stop the buzzer from...
Learn More >LHA / LNK Series: Enabling and configuring Auto Capture of snapshots
You can set the LHA / LNK Series DVR / NVR to record snapshots using the Auto Capture feature. Auto Capture automatically saves snapshots of a camera image at time intervals, and...
Learn More >41 - 50 of 210