Configuration and Setup
Search Articles in this category
LNR200 / LNR300 Series: Configuring Substream Settings on your NVR
Substream settings allow you to configure the video quality settings for streaming to a PC / Mac or smartphone / tablet. Substream allows you to conserve Internet bandwidth for connections over the...
Learn More >LNR200 / LNR300 Series: Configuring the On-Screen Display (OSD) and camera name
The On-Screen Display (OSD) sub-menu allows you to configure custom names for your cameras or configure the on-screen text shown for your cameras. The following instructions require you to access your...
Learn More >LNR200 / LNR300 Series: Connecting your NVR to a Local Area Network (LAN)
Before accessing your LNR200 / LNR300 Series NVR, you must ensure that it is connected to a Local Area Network (LAN) using the included Ethernet cable. To connect NVR...
Learn More >LNR200 / LNR300 Series: Enabling email notifications using the Lorex email server
You can configure your LNR200 / LNR300 Series NVR to send you email alerts when an event occurs (for example, motion detection or video loss). The following instructions require you to...
Learn More >LNR200 / LNR300 Series: Incorrect time or time changing automatically on the recorder
The time on your LNR200 / LNR300 Series NVR can be configured manually, or automatically by enabling Network Time Protocol (NTP). If the recorder is showing the incorrect time, or the...
Learn More >LNR200 / LNR300 Series: Not receiving email notifications when using Lorex email
The Lorex email server can be used to send and receive alerts such as motion detection or other events recorded on your LNR200 / LNR300 Series NVR. To send out motion detection...
Learn More >LNR200 / LNR300 Series: NVR keeps beeping
Your LNR200 / LNR300 Series NVR can be set to beep when there are specific errors or events. These include motion alerts, hard disk drive (HDD) warnings, network connectivity warnings, tampering,...
Learn More >LNR200 / LNR300 Series: Pairing your remote control
The remote control comes pre-paired to your LNR200 / LNR300 Series NVR. If you have more than one NVR, you can pair the remote control to a specific NVR. The following...
Learn More >LNR200 / LNR300 Series: Pausing and resuming sequence mode
In Sequence mode your LNR200 / LNR300 Series NVR system will automatically cycle through the Live View of connected cameras every few seconds. When using sequence mode, you have the option to...
Learn More >LNR200 / LNR300 Series: Restoring your NVR to default settings
If you encounter a troubleshooting issue that cannot be resolved, you may need to restore your LNR200 / LNR300 Series NVR system to default settings. Restoring default settings will reset any conflicting...
Learn More >131 - 140 of 210